26 Jan Pellet Mill
Posted at 16:11h
in
Model | Diameter mm | Die width mm | Amm | Bmm | Cmm | Capacity – Cattle feedt/h | Capacity – Poultry feedt/h | Installed powerKw | Weight approx. Kg |
---|---|---|---|---|---|---|---|---|---|
PGPM300 | 300 | 90 | 1600 | 1640 | 1550 | 2,5 | 3,5 | 45-55 | 2500 |
PGPM420 | 420 | 140 | 2050 | 2160 | 1850 | 6 | 8 | 90-110 | 5500 |
PGPM520 | 520 | 178 | 3000 | 2300 | 1950 | 9 | 12 | 132-160-200 | 7500 |
PGPM630 | 630 | 200 | 3275 | 2045 | 2045 | 12 | 18 | 160-200-250 | 9000 |
PGPM750 | 750 | 250 | 4500 | 2245 | 2550 | 18 | 22 | 250-315 | 13000 |
PGPM835 | 835 | 280 | 4500 | 2245 | 2750 | 20 | 25 | 250-315-355 | 16000 |
PGPM950 | 950 | 300 | 4970 | 2525 | 2900 | 25 | 35 | 400-450 | 22000 |
PGPM1200 | 1200 | 350 | 5400 | 2900 | 3500 | 32 | 50 | 500-560-630 | 32000 |
PGPM PELLET MILLS
TECHNICAL FEATURES
- Die diameter from 300 mm to 1200 mm
- Main structure made of considerably thick steel
- Drive pulley installed on a countershaft between two separate supports, coupled to the main motor by an elastic—block coupling
- Machine door entirely made of inox AISI 304 stainless steel, with two knives
- Feed chute made of inox AISI 304 stainless steel with a choke with quick dump controlled by a pneumatic cylinder
- A permanent magnet is fitted in the chute to prevent ferrous metal from entering the die
- Rotor group made of a die holder mounted on the main shaft by means of two bearings able to withstand high workloads and high temperature
- Segmented die clamp makes bolt alignment easy, and facilities fast die change
- Main shaft mounted on the base by means of bronze bushings
- Bearing lubrication is guaranteed by an internal circuit that also works when the machine is working
- Pellet mill is driven by an electric motor via a V-belt transmission.